Updating Os And Software; Updating Io - Vision Fitness R20 Service Manual

CHAPTER 5: SOFTWARE UPGRADE PROCEDURE
5.1 Software Upgrade Procedure
5.1.1 Update File Description
OS Update File: NK.rom；
Elegant Console Update Software File: DeluxeGUIDeploy.CAB;
Touch Console Update Software File: PremierGUIDeploy.CAB
* Note: update the software after the OS is updated.

5.1.2 Updating OS and Software

* Note: OS files need to distinguish between 7, 10, and 15 inch displays. The OS file names are the same.
1. Choose the correct OS nk.rom file according to the LCD size, and place the file on a USB flash drive.
2. Update the software version on the USB.
- Elegant console choose "eluxeGUIDeploy.CAB".
- Touch console choose "PremierGUIDeploy.CAB".
* Note: The two files cannot be placed together at the same time on the USB
3. Place the "updadte.config" file on the USB flash drive.
4. Start up the console, and insert the USB flash drive into the slot in the front of the console. The files will
update automatically.

5.1.3 Updating IO

1. IO Update Files: BL_130.TXT, PATCH.TXT, and IO1.TXT.
2. Place the three files above on the USB flash drive.
* The name of the update file for the Elegant and Touch consoles are the same, no need to distinguish.
3. Also place the "Update.config" file on the USB flash drive.
4. Start up the console, and insert the USB flash drive into the slot in the front of the console. The
software will update automatically.
OS update file
Software update file
Configuration file
Sub MCU update file
39