Physical Installation - Martin EFX500 User Manual

power plug that matches your socket type, install a suitable grounding-
type (earthed) power plug on the power cable. Consult a qualified
electrician if you have any doubts about proper installation.
Follow the power plug manufacturer's instructions, connecting the
appropriate wires to ground (earth), live, and neutral. The table below
shows some common wire identification schemes.
Function
ground (earth)
P h y s i c a l i n s t a l l a t i o n
Each Mania EFX fixture must be either:
• fastened to an overhead structure by means of its mounting plate and a
Martin rigging clamp (available from your Martin dealer), or
• fastened to a surface by means of its mounting plate and suitable bolts.
Do not install the fixture by any other means, as this can cause the fixture
to overheat.
Ensure that the mounting structure or surface and all fasteners used can
support at least 10 times the weight of all installed fixtures, clamps,
cables, auxiliary equipment, etc.
Ensure that the fixture is located:
• at least 1 meter (3.3 ft.) away from the surface to be illuminated,
• at least 0.1 meters (4 in.) from any combustible materials (wood, fabric,
paper, etc.) and
• well away from any flammable materials.
Ensure that the clearance around the fan and air vents is at least 0.1
meters (4 in.) and that airflow is free and unobstructed.
Warning! Block access below the work area and work from a stable
platform when installing or servicing the fixture.
Always use a secure means of secondary attachment that can
hold at least 10 times the weight of the fixture, looping it
through the attachment point shown at F in "Overview" on
page 4. Do not simply pass the secondary attachment around
the mounting plate, as this will leave the fixture unsecured.
Wire (EU)
live brown
neutral blue
yellow/green
Installation
Wire (US)
black
white
green
Table 1: Cord cap wiring
Marking Screw color
"L" yellow or brass
"N" silver
green
9