Martin EFX500 User Manual page 21

fade time programming (a fade time is the time taken for effects to change
from one scene to the next). If you select tracking, the DMX controller
defines fade times.
EFX500 and EFX600 models only
Pan: The mirror drum pans (swivels) approx. 180°. A pan position can be
selected, pan can be set to narrow or wide shake, or pan can be set to
music trig.
Tilt: The mirror drum tilts (rotates) 360°. The drum can be held in a
stationary position, set to rotate in either direction, set to narrow or wide
shake, or set to music trig.
EFX800 models only
Tilt: The color paddlewheel tilts (rotates) 360°. The paddlewheel can be
held in a stationary position, set to rotate in either direction, set to narrow
or wide shake, or set to music trig.
Unsure about speed and tracking ?
Set the fixture to tracking if you are using programmed fade times or
macros on your DMX controller. Select an effects speed if you are not
using programmed fade times or macros on your DMX controller.
However, if you are using fade times on your controller and have set the
fixture to tracking, but effects movement is rough and irregular, setting
fade times on your controller to zero and selecting an effects speed may
give smoother movement.
Effects movement is set to 'tracking' if the fixture is in DMX mode 1 and by
default.
D MX si gn al in di cato r
When a Mania EFX fixture
receives a valid DMX
DMX signal received
signal, the green Data
LED will light to show that
the fixture is receiving
control data.
Data LED
DMX Address
lit
X100 X10 X1 Mode
Operation 21