HIKVISION Network Video Recorder User Manual page 21

User Manual of Network Video Recorder
No. Name
6 POWER ON/OFF
7 USB Interfaces
No. Name
1 USB Interface
Status
2
Indicators
3 SHIFT
Composite
4
Keys
Function Description
Power on/off switch.
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
Figure 1. 5 DS-7600NI-ST/SP
Table 1. 3 Description of Control Panel Buttons
Function Description
Connects USB mouse or USE flash memory devices.
POWER Turns green when NVR is powered up.
READY
The LED is green when the device is running normally.
The light is green when the IR remote control is enabled;
The light is red when the function of the composite keys (SHIFT)
STATUS
are used;
The light is out when none of the above condition is met.
ALARM
The light is red when there is an alarm occurring.
HDD
Blinks red when HDD is reading/writing.
Tx/Rx
Blinks green when network connection is functioning normally.
Switch between the numeric or letter input and functions of the
composite keys. (Input letter or numbers when the light is out;
Realize functions when the light is red.)
Switch between the numeric or letter input and functions of the
SHIFT composite keys. (Input letter or numbers when the light is out;
Realize functions when the light is red.)
Enter numeral "1";
1/MENU
Access the main menu interface.
Enter numeral "2";
Enter letters "ABC";
The F1 button when used in a list field will select all items in the
2/ABC/F1
list.
In PTZ Control mode, it will turn on/off PTZ light and when the
image is zoomed in, the key is used to zoom out.
Enter numeral "3";
Enter letters "DEF";
3/DEF/F2
The F2 button is used to change the tab pages.
In PTZ control mode, it zooms in the image.
Enter numeral "4";
4/GHI/ESC
20