High-definition Vandal-proof Dome Camera· User Manual
2. Set the menu button up/down/left/right to position the camera
ID.
3. Press the button to save the position and exit.
3.1.13 SYNC Setting
Both internal and line lock synchronization are available.
Note:
Only the camera which supports AC 24 V power has line lock
synchronization.
If 12V DC power supply is applied, SYNC mode is internal
synchronization and it is not adjustable.
If 24V AC power supply is applied, you can select either
internal or line lock synchronization.
Note:
Internal synchronization is the default SYNC method. Set the
menu button to right for about 2 seconds, you can switch the SYNC
mode to line-lock from the SYNC settings . Perform the same
CAMERA ID
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!"#$%&'
()_` , ¥:;<= >?@\^*.x+/
← → ↑ ↓ CLR POS
RETURN
Figure 3-14 CAMERA ID
43