Table of Contents
Advertisement
Inch – Enters or converts to inches. Entry can be
whole or decimal numbers. Also used with for
entering fractional inch values (e.g.,
). Repeated presses during conversions toggle
between fractional and decimal inches.
Fraction Bar – Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8, 1/16) or
improper (3/2, 9/8). If the denominator (bottom) is
not entered, the calculator's fractional accuracy
setting is automatically used. Results are always
shown in typical building fractional format.
Identifies/Converts to gallons per minute (gpm)
Identifies/Converts to liters per second (l/s)
Identifies/Converts to cubic feet per minute (cfm)
Identifies/Converts to cubic feet per second (cfs)
Identifies/Converts to ºC
Identifies/Converts to ºF
Pounds (lbs) – Enters or converts a weight or
7
volume value to pounds.
Kilograms (kg) – Enters or converts a weight or
volume value to kilograms.
Meters – Enters or converts to meters.
Millimeters – Enters or converts to millimeters.
Gallons – Enters or converts to gallons.
Liters – Enters or converts to liters.
Plumbing Project Keys
Enters or calculates a slope ratio or slope angle.
(%Grade) – Used to enter or solve Percent Grade.
Calculates Percent Grade based on entered Offset
6 — P
C
lUmbinG
alC
™ P
ro
Advertisement
Table of Contents
