Length, Width And Height Keys; Construction Project Keys - Calculated Industries 4325 Pocket Reference Manual

Ç 7
Ç 9
Ç 2

Length, Width and Height Keys

l
W
h

Construction Project Keys

Í
Ç Í
Centimeters (cm) — Enters
or converts to Centimeters.
Millimeters (mm) — Enters
or converts to Millimeters.
Acres (Acre) — Enters or
converts to Acres.
Enters Length for calculation
of Area or Volume.
Enters Width and calculates
Area, Square-up and
perimeter.
Enters Height and calculates
Volume, wall Area and total
room Area. Calculates Height
(Depth) based on entered
Width and Slope or Percent
Grade. This is a permanent
entry; stored value holds
when turned off.
Slope — Enters or calcu-
lates a slope ratio or slope
angle. Calculates based on
entered Width and Height
(Depth).
Percent Grade (%Grade) —
Used to enter or solve Percent
Grade. Calculates Percent
Grade based on entered
Width and Height (Depth) or
Slope.
P R
OCKET EFERENCE
G — 3
UIDE