Table of Contents
Advertisement
and Run or Slope.
Enters, calculates or stores the Offset (Rise).
Enters or calculates the Run.
Enters or calculates the Travel (Diagonal). Used to
calculate pipe length.
Defines the pipe material used for various pipe
sizes used in Pressure Loss calculations.
Defines the nominal Pipe Size being used.
Defines the Pipe Type based on Pipe Material.
Enter or calculate volumetric Flow Rate through
a Pipe.
(Velocity) – Enter or calculate Velocity and convert
between feet per second, feet per minute and
meters per second.
Enter value for Force/Area calculations. Calculate
Pressure Loss. Convert between units of pressure.
Calculate Force and convert between lbf, newton.
Enter for Flow, Velocity, Pressure, Force
calculations. Calculate Area given values for Flow/
Velocity or Force/Area. If a Pipe Size has been
selected, Area will match Inside Dimension for pipe
of the current material and type.
miscellaneous functions
Displays value of
(+/–) Toggle displayed value between minus and
plus value.
Clear All – Returns all stored values to the default
settings. (Does not affect Preference settings.)
Square root function
π
(3.141593).
U
'
G
— 7
ser
s
Uide
Advertisement
Table of Contents
