Terminal - Denon DMD-F101 Operating Instructions Manual

(4) CD synchronized recording (when connected to the DRA-F101 and DCD-F101)
Use this function to record CDs easily.
2
Connect the Digital output terminal of CD player (DCD-F101) to digital input terminal of this unit with connecting
2
cords for digital recording.
VOLUME
MEMORY TUNING SOURCE
FUNCTION TONE TIMER DISPLAY / SET DOWN UP BAND DIRECT
SYSTEM
ON / STANDBY
PHONES
AM-FM STEREO RECEIVER DRA-F101
DRA-F101
1
2 2
ON / STANDBY
REPEAT
TRACK
COMPACT DISC PLAYER DCD-F101
DCD-F101
3 4
1 3
POWER LOADING MECHANISM
ON / STANDBY
INPUT MEMO REC /
CHARACTER
18T r0 2 m 4 6 s
-
L
1 -60 40 -30 -20 -12 -6 -2 0 REC LEVEL
dB
R / ENTER
MINIDISC RECORDER DMD-F101
This unit
6
Remote control unit
OFF ON
1
SYSTEM
POWER
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
10 +10
5
CD SRS
TAPE MD TIME EDIT
TIME/
DIMMER
PANEL
NOTES:
• The CD synchronized recording function will not work if the CD player is set to the program mode. In such case,
release the program mode. When in the random play mode or repeat play mode, these modes are released
automatically and the CD synchronized recording mode starts.
• When TOC writing starts, the " " indicator flashes. Do not shake the main unit, or unplug the power supply
cord while the TOC is being written. If the data is not recorded property, it will not be possible to play the disc.
• If editing has been performed and the TOC data has not yet been written, " Write UTOC " is displayed and the
recording mode cannot be set.
• If you perform synchro recording of CD tracks that are " Copy Prohibited ", the tracks are automatically
recorded in the analog mode " SCMS Ana. Rec " is displayed. When this happens, the analog recording mode
remains set until the synchro recording mode is canceled. For some CDs, the beginning of the track may remain. If
this happens, erase the beginning of the track following the procedure at "14-(1) Erasing tracks" on page 22.
Turn on the power of the receiver.
1
• System's power turn on.
Load the CD that you want to record to the disc
2
holder of CD player.
3
Load a recordable MiniDisc into the MD slot.
Press the INPUT button to select the "Optical-1"
4
or "Optical-2" which is connected to DCD-F101.
Press the CD synchro recording button (CD SRS)
of this unit to select the synchro recording mode.
• Each press of the button switches the unit as
described below.
SRS1disc Rec? : Records one entire
CD.
5
SRS Make Gp? :
Records one entire
CD and automatically
5
registers it as one
group.
EDIT CD SRS MULTI REC
SRS1Tr Rec? :
Records only the
+
designated 1 track of
the CD.
A single track can be recorded with the
synchro recording function by selecting the
desired track using the CD skip buttons (
) then specifying " S R S 1 T r
and
9
Rec? " on the MD recorder.
Press the ENTER button of the main unit.
• Recording starts automatically.
This unit and the CD will stop automatically
6
when playback of the CD has ended, as well
as when the disc has been fully recorded
before the CD has finished playing.
When you want to stop recording, press the
(stop) button of this unit or CD player and the TOC
recording will be performed.
(5) Synchronized recording (when connected to D-F101 series)
When the DMD-F101 is set to the recording pause mode, recording starts automatically when the play/pause button
2
( / ) on the CD player or Cassette deck is pressed.
1 3
MEMORY TUNING
FUNCTION TONE TIMER DISPLAY / SET DOWN UP
SYSTEM
ON / STANDBY
PHONES
DRA-F101
1
2
POWER LOADING MECHANISM
ON / STANDBY
18T r0 2 m 4 6 s
L
1
dB -60 40 -30 -20 -12 -6 -2 0
R
This unit
ON / STANDBY
TRACK
DCD-F101
8
e
ON / STANDBY
DOLBY NR
CD SRS REC 0 PLAY 1
ON
OFF
DRR-F101
Remote control unit
2
OFF ON
SYSTEM
POWER
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
(6) Timer functions (when connected to the DRA-F101)
The timer functions of the receiver (DRA-F101) can be used to play cassette tapes or record radio programs ("Air
2
Check") at set times.
• Refer to the operating instruction included with the DRA-F101.
Turn on the power of receiver.
1
VOLUME • System's power will be turn on.
SOURCE
BAND DIRECT
Inset a Recordable MiniDisc that is to be
2
recorded into the MD insertion slot.
AM-FM STEREO RECEIVER DRA-F101
Press the input selector button of this unit to
3
select the source terminal connected the unit
that you want to record.
3 4
Press the record button of DMD-F101 once to
4
set the record pause mode.
1 3
INPUT MEMO REC / EDIT CD SRS MULTI REC
Press the play/pause button of the CD player
CHARACTER
- +
REC LEVEL
and the play button of the Cassette deck.
/ ENTER
MINIDISC RECORDER DMD-F101
• Recording starts automatically.
CD player or Cassette Deck will stop
automatically when playback of the unit has
5
ended and MD is set to record pause mode.
Stopping the recording
5
Press the (stop) button of CD player or
2
Cassette Deck to stop the playback of Discs
or cassette tape. This unit set to record pause
REPEAT
mode.
COMPACT DISC PLAYER DCD-F101
When you want to stop the recording, press
the (stop) button of MD and the TOC
2
recording is performed.
5
PLAY
NOTES:
• When TOC writing starts, the "
CD SRS REC
flashes. Do not shake the main unit, or unplug the
REVERSE
MODE
power supply cord while the TOC is being written. If
CASSETTE DECK DRR-F101
the data is not recorded property, it will not be
possible to play the disc.
• If editing has been performed and the TOC data has
not yet been written, " W r i t e
displayed and the recording mode cannot be set.
1
" indicator
U T O C " is
31