Denon DMD-F101 Operating Instructions Manual page 26

(5) Changing the order of the tracks
• Use this function to change the order of the recorded tracks on the MiniDisc.
MOVE
7
(Main unit)
POWER LOADING MECHANISM
ON / STANDBY
18T r0 2 m 4 6 s
L
1
dB -60 40 -30 -20 -12 -6 -2 0
R
In the stop mode, press the EDIT button.
1
• " Edit Mode " is displayed.
Either turn the jog dial on the main unit or press one of the automatic search buttons (
2
remote control unit.
• Display " Program Move? ".
Press the jog dial on the main unit or the ENTER button on the remote control unit.
• Display " New 01<--Tr ".
3
• Reprogram the first track.
After turning the jog dial on the main unit or pressing one of the automatic search buttons (
the number buttons on the remote control unit, press the ENTER button and program the track to be moved.
• For example, to move the track that is currently third to the beginning, specify "3". At this time " New
4
01<03Tr " is displayed. When the ENTER button is pressed, the mode for selecting the next track number
is set and " New 02<--Tr " is displayed.
• To program other track numbers, repeat step 4.
Press the ENTER button.
• To fix the program in step 4, press the ENTER button while " New CC <--Tr " is displayed.
5
• " Prog. Move OK? " is displayed.
Press the ENTER button to move the track(s).
6
• " Complete " is displayed.
Press the 5 (eject) button.
• The TOC data is written and the disc is ejected.
• When TOC writing starts, the "
cord while the TOC is being written. If the data is not recorded properly, it will not be possible to play the
7
disc.
• The TOC data can also be recorded by performing the following operations:
• Pressing the power button to set the power to the standby mode.
• In the stop mode, press the (stop) button.
2
• Up to 25 tracks can be specified.
• Press the CLEAR button at step 5 to clear the track number that was last programmed.
• Press the CALL button at step 5 to check the program.
• To cancel the move operation, press the
2
NOTES:
• Tracks that have not been programmed are moved behind the programmed tracks.
• It is not possible to program the same track more than once.
• On group registered discs, changing the order of the tracks of this section is not possible.
Please use "Moving tracks" of Page 25.
26
(Remote control unit)
EJECT
7
1
1
4
7
1 3
10
2,4
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER
- +
REC LEVEL
/ ENTER
MINIDISC RECORDER DMD-F101
REPEAT RANDOM
TITLE CHARACTER
2~6
REMOTE CONTROL UNIT RC-282
8
" indicator flashes. Do not shake the main unit, or unplug the power
(stop) button or the CLEAR button before step 6.
2. Adding titles or erasing titles
Up to 100 characters can be input for the track and disc titles.
2
(1) Adding disc titles
POWER
2 3
7
(Main unit)
5 6
4
8 9
+10
CALL
CLEAR GROUP
ON / STANDBY
PROG/
DIRECT
EDIT ENTER
3~6
TIME
1
1
Load the disc to which you want to give a title.
Press the EDIT button after the total number of tracks on the disc and the total playing time are displayed (in
and ) on the
9 2
the stop mode).
• " Edit Mode " is displayed.
Either turn the jog dial on the main unit or use the automatic search buttons (
3
control unit to display " Disc Name In? ".
Press the jog dial on the main unit or the ENTER button on the
4
remote control unit.
and ) or
8 9
• The cursor flashes, indicating the title input standby mode.
Input the title.
• Either turn the jog dial on the main unit or use the automatic search buttons (
control unit to select the desired character.
• Some characters that can be input on this unit cannot be displayed on other models.
• The shape of the cursor changes each time the CHARACTER button is pressed.
[Explanation of cursor:]
............... Capital letter/number input mode
5
............... Small letter/number input mode
[Available characters and numbers]
Capital letter/number input mode:
ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
Small letter/number input mode:
abcdefghijklmnopqrstuvwxyz0123456789
Special character input mode:
(Space)
• When the manual search forward button (
and the unit is set to the input standby mode for the next character.
• The cursor can be moved back by pressing the manual search reverse button (
input characters.
1 2,6
1 3
POWER LOADING MECHANISM
3,5
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER
18T r0 2 m 4 6 s
- +
L
1 REC LEVEL
dB -60 40 -30 -20 -12 -6 -2 0
R / ENTER
MINIDISC RECORDER DMD-F101
5 3~5
............... Special character input mode
) or the ENTER button is pressed, the selected character is set,
7
(Remote control unit)
EJECT POWER
7
1 2 3
4 5 6
7 8 9
10 +10
CALL
CLEAR GROUP
PROG/
DIRECT
REPEAT RANDOM EDIT ENTER
4,5
TITLE CHARACTER TIME
5 2,6
REMOTE CONTROL UNIT RC-282
and ) on the remote
8 9
OPT 1
and ) on the remote
8 9
). Use this to correct
6