Various Recording Functions - Denon DMD-F101 Operating Instructions Manual

11

VARIOUS RECORDING FUNCTIONS

1. Adding track numbers during recording
• Track numbers can be added during recording regardless of the recording mode.
ON / STANDBY
During recording, press the MULTI REC button.
• When the MULTI REC button is pressed during
1
recording, a track number is added at that point.
• A new track number cannot be added for
approximately 4 seconds after the last track number.
2. Stopping recording temporarily
• Recording can be stopped temporarily then resumed from the same point.
ON / STANDBY
During recording, press the (play/pause) button.
1 3
• When the (play/pause) button is pressed during
1 3
recording, the pause mode is set at that point and the
1
track number changes.
• Press the 1 3 (play/pause) button to resume
recording.
• A blank section of approximately 2 seconds is inserted before recording resumes.
16
1
1 3
POWER LOADING MECHANISM
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER
18T r0 2 m 4 6 s
- +
L
1
REC LEVEL
dB -60 40 -30 -20 -12 -6 -2 0
R / ENTER
MINIDISC RECORDER DMD-F101
Press the MULTI REC button.
1st track 2nd track
(Recording continues.)
1
1 3
POWER LOADING MECHANISM
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER
18T r0 2 m 4 6 s
- +
L
1 REC LEVEL
dB -60 40 -30 -20 -12 -6 -2 0
R / ENTER
MINIDISC RECORDER DMD-F101
q Press the
1 / 3 (play/pause) button.
1st track 2nd track
(Pause)
w Press the
/ (play/pause) button.
1 3
3. Recording from a point 6 seconds back ......................................................
• With this function you can start recording from a point up to 6 seconds back in the sound that was being input to the
set when the recording pause mode was set.
(1) Press the MULTI
REC button.
REC PAUSE
• Use this function to prevent missing the beginning of the satellite broadcast or other program you want to record
using the "AIR CHECK" function.
ON / STANDBY
1
Perform the operations under "Starting recording" on Pages 14 and 15.
1
• To record an analog input, perform steps 1 to 8 under "Analog recording".
• To record a digital input, perform steps 1 to 7 under "Digital recording".
Press the MEMORY REC button.
2
• Recording starts from a point up to 6 seconds before the button was pressed.
• "Memory Rec" is displayed.
• To cancel the memory rec mode, press the
2
• Recording stops and the TOC data is written on the MD.
NOTE:
• The set stores in the memory the sound which is being input at the point when the recording pause mode is set.
Thus, the sound from 6 seconds ago cannot be recorded if recording is started more than 6 seconds after the
recording pause mode is set.
In addition, if the input is switched with the INPUT button (INPUT) in the 6 seconds before memory recording is
started, the sound recorded before the input was switched may be recorded.
NOTE:
• When TOC writing starts, the " " indicator flashes. Do not shake the main unit, or unplug the power cord
while the TOC is being written. If the data is not recorded properly, it will not be possible to play the disc.
(2) Press the
MEMORY REC
(Recording stopped)
button.
REC Set mode
Recorded section
6 seconds
1 3
POWER LOADING MECHANISM
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER
18T r0 2 m 4 6 s
- +
L
REC LEVEL
dB -60 40 -30 -20 -12 -6 -2 0
R / ENTER
MINIDISC RECORDER DMD-F101
2
(stop) button.
Memory Recording