System Functions - Denon DMD-F101 Operating Instructions Manual

16

SYSTEM FUNCTIONS

(1) System connection
Operation is even easier when the components in the D-F101 series are connected to the DMD-F101 with system
2
connections. (For instructions on connections, refer to the respective operating instructions of receiver (DRA-F101).
The system functions will only work when the components of the D-F101 series are connected. They will not work
2
with other components.
The system function signals for operating the components in the D-F101 series are all output from the receiver (DRA-
2
F101). Thus, when making system connections, be sure to connect the receiver (DRA-F101).
(2) Auto power on function (when connected to the D-F101 series components)
When the system is set to the standby mode, you can start the playback of disc simply by pressing the play/pause
2
button.
(Remote control unit)
OFF ON
SYSTEM
POWER
PROG /
DIRECT
1 2 3
CALL
4 5 6
CLEAR
7 8 9
RANDOM REPEAT
10 +10
CD SRS
TAPE MD TIME EDIT
TIME/
DIMMER
PANEL
RDS BAND TUNING
2
STOP PLAY VOLUME
/SELECT
PRESET
+
-
TAPE
SLEEP FUNCTION MODE
CD
TUNER
MD
TAPE
RC-927
REMOTE CONTROL UNIT
30
Set the function select switch on the remote
1
control to "MD" position.
Press the play/pause button.
• System's power turn on and the function of
2
receiver automatically switches to "MD".
And then, the MD starts playing.
When a MD is loaded with the DMD-F101 in the
standby mode, MD playback can be started simply
by pressing the play button (
1
remote control unit. (RC-927)
When the receiver (DRA-F101) is in the standby
mode, the system power does not turn on even if
the play button ( / ) on the main unit is pressed.
1 3
1
(3) Auto function selection (when connected to the D-F101 series)
Use this function to switch the function to "MD" and start playing the disc simply by pressing a single button.
2
(Main unit)
ON / STANDBY
18T r0 2 m 4 6 s
1
(Remote control unit)
1
4
7
10
RDS
/ ) on the system
3
1
STOP
-
TAPE
TUNER
TAPE
REMOTE CONTROL UNIT
1
1 3 Press the play/pause button while a unit other
POWER LOADING MECHANISM
than the DMD-F101 (CD player or Cassette
deck) is playing.
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER
- + • Playback on the currently playing unit stops.
L
dB -60 40 -30 -20 -12 -6 -2 0 REC LEVEL
R / ENTER
MINIDISC RECORDER DMD-F101
At the same time, the receiver's function
1
switches to "MD" and the MD starts playing.
OFF ON
SYSTEM
POWER
PROG /
DIRECT
2 3
CALL
5 6
CLEAR
8 9
RANDOM REPEAT
+10
CD SRS
TAPE MD TIME EDIT
TIME/
DIMMER
PANEL
BAND TUNING
PLAY VOLUME
/SELECT
PRESET
+
SLEEP FUNCTION MODE
CD
MD
RC-927
To perform this operation from the system
remote control unit, first turn the remote
control unit's function select switch and set
the function to "MD".