Editing - Denon DMD-F101 Operating Instructions Manual

14

Editing

The editing functions can be used to add track numbers, combine tracks, erase unwanted sections, etc.
It is also possible to give titles to discs and tracks.
Use the editing functions to get the best of the excellent operability that MiniDiscs offer.
1. Editing
• This unit is equipped with the following four editing functions:
ERASE DIVIDE
• Erasing single • Dividing tracks
tracks
• Erasing all tracks
• Erasing a certain
section of a track
• When editing tracks, adding or erasing titles, close the accidental erasure prevention tab to
cover the hole.
22
Editing functions
COMBINE MOVE
• Combining track • Moving tracks
(1) Erasing tracks
[Erasing one track at a time]
1
ERASE
(Main unit) 5
ON / STANDBY
These four editing
functions can be
combined for a
variety of editing
possibilities.
In the stop mode, display the number of the track to be erased.
• Either turn the jog dial on the main unit or use the automatic search buttons (
1
control unit to display the number of the track to be erased.
• This step is unnecessary when you want to erase the paused track.
Press the EDIT button.
2
• " Edit Mode " is displayed.
Either turn the jog dial on the main unit or press one of the automatic search buttons (
3
remote control unit.
• Display " Track Erase? ".
Press the jog dial on the main unit or the ENTER button on the remote control unit.
• "Complete" is displayed.
4
• During the pause mode, that track is erased.
• When a track is erased during the pause mode, the stop mode is set after the track is erased.
• When a track is erased, the numbers of the tracks following that track are all decreased by one.
Press the 5 (eject) button.
• The TOC data is written and the disc is ejected.
• When TOC writing starts, the "
cord while the TOC is being written. If the data is not recorded properly, it will not be possible to play the
5
disc.
• The TOC data can also be recorded by performing the following operations:
• Pressing the power button to set the power to the standby mode.
• In the stop mode, press the
2
1 3
POWER LOADING MECHANISM
1,3
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER
18T r0 2 m 4 6 s
- +
1 L
REC LEVEL
dB -60 40 -30 -20 -12 -6 -2 0
R / ENTER
MINIDISC RECORDER DMD-F101
1,3,4
" indicator flashes. Do not shake the main unit, or unplug the power
(stop) button.
2
(Remote control unit)
M
EJECT POWER
5
1 2 3
4 5 6
7 8 9
10 +10 CALL
CLEAR GROUP
PROG/
DIRECT
REPEAT RANDOM EDIT ENTER
4
TITLE CHARACTER TIME
2
REMOTE CONTROL UNIT RC-282
and ) on the remote
8 9
and ) on the
8 9