Calibrate - Mustek Docking Scanner User Manual

Calibrate

NOTES
• Always clean Scanner's rollers and lens first before
calibration. If cleaning rollers and lens did not
improve image quality, then perform calibration.
• If necessary, perform calibration few times until
image quality is improved.
• Make sure the Calibration Card is clean and free of
dust before use.
1. Open iScan Pro. Press the
at the top-right corner, select the Calibrate
setting.
2. Remove the plastic foil on the Calibration
Card, insert it in the Feed Slot with the arrow
mark facing up and pointing to the Scanner.
3. Press the Calibrate button.
 The Calibration Card will be pulled into the scanner. Wait
until the Card is ejected with a 'Calibration Done' message,
then Press the OK button.
 Mechanical sounds produced during the calibrating process
are normal.
(Settings) icon
Calibrate
Calibrate
15