Victory Motorcycles Cross Country 2015 Manual page 118

Cross Country/Cross Country Tour Audio System
CB Radio / ICOM System
CB/ICOM Introduction
In the U.S.A., refer to the Federal
Communications Commission (FCC) Plain
Rules pamphlet accompanying this rider's
manual for a comprehensive guide of
citizens band (CB) radio rules and
regulations.
Headset Use
The use of helmet-mounted headsets may be
restricted or prohibited in some areas.
Always obey all applicable regulations and
laws.
The headsets have three separate volume
settings: Intercom (ICOM) volume, CB
receive volume and entertainment (ENT)
volume. See page 113.
Getting Started
Tip: To minimize distractions while riding, always
make adjustments to the CB/ICOM system
prior to operating your motorcycle.
Tip: To prevent battery drain, do not leave the
key in the ACC position for long periods.
VICTORY recommends using the audio
system only when the engine is running.
The ignition key must be in the ACC or ON
position to use the audio system.
1. Press VOL (+) to turn the audio system
on.
2. Press COM on
the left control to
activate the CB/
COM system.
116
CB Channels
When the CB radio system is active, "CB"
and the active channel will display.
FM
ICOM
CB19
Press and hold
COM on the upper
left control to
access the
CHANNEL
ADJUST screen.
Push COM or ICOM to change channels.
COM
CHANNEL ADJUST
+/-
ICOM
Tip: Changing to a new channel may require
changing the squelch setting.
Wait 5 seconds or push VOL (+) or VOL (-)
to exit the screen and return to the main
display.
P1
100.5
CB 19
ST