Dmx Control; Static Color; Auto Programs; Edit Customs - Chauvet COLORado Batten 72 Tour User Manual

DMX Control

Static Color

Auto Programs

Edit Customs

COLORado™ Batten 72 Tour User Manual Rev. 4
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Set the running mode:
a. Go to the RUN main level.
b. Select the DMX programming level.
2. Set the starting address:
a. Go to ADDRESS.
b. Select the starting address (001~512).
The highest recommended starting address for each DMX mode are as follows:
DMX Mode DMX Address
TOUR
501
ARC1
510
ARC1+D 509
TR16
495
The Static Color mode allows for permanent RGBWA color mixing without a DMX
controller.
1. Go to the STATIC main level.
2. Select the desired color (RED, GREN, BLUE, WHIT, or AMBE).
3. Select the desired color value (000~255).
4. Repeat for the other colors.
5. Select STRB.
6. Select the desired frequency (00~20).
Auto programs allow for dynamic RGBWA color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AUTO 01~10) or custom program (CUSTOM 01~10).
You cannot edit any of the auto programs (AUTO 01~10). However, you can edit the
custom programs (CUSTOM 01~10). See Edit Customs below for details.
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired auto program (CUSTOM 01~10).
3. Select the desired scene (SCENE 01~30).
4. Select the desired color or effect (RED, GREN, BLUE, WHIT, AMBE, STRB, TIME, or
FADE).
5. Select the color or effect value (000~255 for colors and timers, or 00~20 for strobe).
6. Repeat for the other colors or effects.
7. Return to the SCENE level (step "3").
8. Repeat the settings of colors and effects for the other scenes.
DMX Mode DMX Address
ARC2
508
ARC2+D
507
ARC2+S 506
Operation
DMX Mode DMX Address
HSV
510
BLOCK1
504
BLOCK2 498
-9-