Installing The Smart Thermostat - Ecobee Smart Thermostat Installation Manual

ACC
or
ACCr
ACC
or
ACCr
Powered & Non-Powered Accessories
Powered or Non-Powered Accessories
Ventilator
Dehumidify or
ACC
Max Input
ACCr
Ventilator (Heat Recovery or Energy Recovery)
11
Humidi er or
Dehumidi er
Line In
Humidi er or
Dehumidi er
Line In
Line In
Ventilator Heat Recovery

Installing the Smart Thermostat

The ideal location for the Smart Thermostat is approximately five
feet above floor level in the main living area.
Do not install the Smart Thermostat:
Close to sources of heat such as incandescent lights,
television sets, or heating/cooling registers.
In direct sunlight.
On exterior, non-insulated or poorly insulated walls.
In the kitchen or other areas of potentially high heat
and/or humidity.
In an area that could restrict air flow, e.g., behind a door.
To install the Smart Thermostat:
1. Remove the front cover of the Smart Thermostat, insert a flat-head
screwdriver into one of the slots as shown below and gently twist
the screwdriver.
Insert screwdriver into one of two slots and twist gently
2. Place the Smart Thermostat backplate on the wall. Make sure that any
existing wires can be inserted through the opening for the wiring.
3. Using the backplate as a template, mark the location of the mount-
ing holes on the wall as shown below.
D- D+ GND +12V
The solid colours indicate mounting holes
12