Krell Industries Home Theater Standard 7.1 Instructions For Use Manual page 68

System Configuration,
Program Remote
Note
Program Remote Screen A
Program Remote Screen B
Note
Press the recall button (31)
on the front panel to return to
Program Remote Screen A.
Then press the previous key
on the Home Theater
Standard 7.1 remote control
to return to the operation
.
screen
64
continued
The final item on the
program a learning remote control to operate the Home Theater
Standard 7.1.
The infrared sensor on the front panel is inactive until programming
is complete.
Select
PROGRAM REMOTE
screens appears with the cursor blinking at
REMOTE
After you press
menu,
OPERATION
from the
OPERATION
KRELL HTS
-PROGRAM REMOTE-
USE FRONT PANEL UP
TO SELECT A COMMAND
SAVE SENDS COMMAND
AND RECALL EXITS MODE
REMOTE INPUT IS INACTIVE
START
the following screen appears:
START,
KRELL HTS
-PROGRAM REMOTE-
ONLY U AND D SAVE AND
RECALL ARE ALLOWED
ON FRONT PANEL. REMOTE
INPUT IS INACTIVE
allows you to
PROGRAM REMOTE,
menu. The
PROGRAM
START.
Krell Home Theater Standard