Krell Industries Home Theater Standard 7.1 Instructions For Use Manual page 15

Front Panel Description,
Processing Mode Buttons
and LEDs,
continued
Display
Individual Channel
Trim Buttons
Krell Home Theater Standard 7.1
continued
23 THX Button
Use this button to select one of the various THX modes available for
the current signal.
24 Front Panel Display
The front panel window provides status messages for Home Theater
Standard 7.1 operations, including volume and balance level, decod-
ing mode and zone information. In addition, when a new device is
selected, the physical inputs are displayed. The display turns off after
60 seconds of inactivity.
Use the center, surr/back, and sub buttons to change taste trims (to
make temporary speaker output adjustments) of +/- 10 dB. These
temporary changes revert to 0 dB when a new device is selected or
when the system is powered down. For more information on taste
trims and master (programmable) trims, see Configure Level
Adjustment, on page 49.
25 Center Button
Press the center button, then use the direction or level buttons (30) to
adjust the center loudspeaker volume.
26 Surr/Back Button
Press the surr/back button, then use the direction or level buttons
(30) to adjust the volume of the surround loudspeakers. To adjust the
back loudspeakers, press the surr/back button. SURROUND TRIM
appears on the front panel display. Press the surr/back button again.
SURR/BACK appears on the front panel display. Then use the direc-
tion or level buttons to adjust the volume of the back loudspeakers.
27 Sub Button
Press the sub (subwoofer) button, then use the direction or level but-
tons (30) to adjust the subwoofer loudspeaker volume.
28 Balance Button
Press and hold this button to adjust the main left/right speaker bal-
ance. This button converts the volume level controls to balance con-
trols.
Balance levels are shown numerically on the front panel display.
Balance may be adjusted in .5 dB increments, up to 6 dB. The center
position is displayed as BAL 0. The balance level buttons revert back
to their original functions as volume level controls after 3 seconds of
inactivity.
11