Range To Detect Setup Wizard - M86 Security IR Web Filter User Manual

Range to Detect Setup Wizard

Click the Start the Setup Wizard button to display Step 1 of
the Range to Detect Setup Wizard. The Wizard is
comprised of six steps. An entry is required in Step 1, but
not in Steps 2 - 5. Settings made using the Wizard are saved
in Step 6.
Step 1
In this step you define the source IP address(es) to be
filtered.
Fig. 2:2-5 Range to Detect Setup Wizard, Step 1
Since the first four pages of the Wizard contain the same
fields and buttons, instructions provided for this step are not
repeated for Steps 2 - 4.
1. Choose the appropriate option for entering the IP
M86 S U G
ECURITY SER UIDE
G
LOBAL
address(es):
• IP / Netmask - use these fields to specify a range of IP
addresses
• Individual IP - use this field to enter a single IP
address
A S
DMINISTRATOR ECTION
C 2: P
HAPTER OLICY SCREEN
233