Create, Maintain A Whitelist Of Ip Addresses - M86 Security IR Web Filter User Manual

G A S C 3: L
LOBAL DMINISTRATOR ECTION HAPTER IBRARY SCREEN
NOTE: This feature can be used in conjunction with the Pattern
Blocking feature, which, when enabled, blocks IP address
patterns. (See the Filter window sub-section in Chapter 1: System
screen.)

Create, Maintain a Whitelist of IP Addresses

1. Enter the IP address to bypass pattern detection filtering.
2. Click Add to include the IP address in the IPs list box.
TIP: To remove an IP address from the list, select the IP address
from the IPs list box, and then click Remove. Multiple IP
addresses can be selected by clicking each IP address while
simultaneously pressing down the Ctrl key on the keyboard. A
block of IP addresses can be selected by clicking the first IP
address in the list, and then pressing down the Shift key on the
keyboard while simultaneously clicking the last IP address in the
list.
3. After all IP addresses have been added and/or removed,
click Apply.
297
M86 S U G
ECURITY SER UIDE