Use The Troubleshooting Mode - M86 Security IR Web Filter User Manual

Use the Troubleshooting Mode

1. Click Enable to begin working in the troubleshooting
2. In the Packet Logging frame, select the Packet Logging
3. At the Capture Device field, the default listening device
4. At the Promiscuous Mode field, the default choice ("on"
5. If necessary, click the appropriate radio button to indicate
6. At the Capture String/Rule field, select the type of
7. Click Execute to display results in the Result list box.
M86 S U G
ECURITY SER UIDE
G
LOBAL
mode.
Time from the available selections (10 seconds, 30
seconds, 60 seconds). This time is the interval during
which the server captures packets in real time, ranging
from the moment the command is executed until the
designated point of time in the future.
for the operation mode displays. If necessary, make a
selection from the pull-down menu that corresponds to
the operation mode used on the network—"LAN2" or
"LAN1".
or "off") displays, based on the operation mode that was
selected. The promiscuous mode is a mode of operation
in which each data packet that is sent will be received
and read by the Network Interface Card (NIC).
whether to turn the promiscuous mode on or off. If "on" is
selected, the Web Filter will watch all network traffic as in
the invisible mode. If "off" is selected, the Web Filter will
only capture packets sent to or from the Web Filter.
packets to be captured: Transmission Control Protocol
(TCP); packets destined to a specified port (80, 443, 81);
packets destined to the Web Filter; packets sent to or
from port 20 or 21; packets sent to the Virtual IP
address's port 137 or 139, or Address Resolution
Protocol (ARP).
A S
DMINISTRATOR ECTION
C 1: S
HAPTER YSTEM SCREEN
115