Create A Custom Block Page; Part I: Modify The Web Filter; Enable Block; Set Up For Each Sub-Group - M86 Security IR Web Filter User Manual

Appendix B

Create a Custom Block Page

M86 offers ways for you to customize the block page so that
the page can have a different look while retaining the infor-
mation/functionality provided in M86's default block page.
NOTE: The solutions provided in this appendix will only let you
customize the Block page, not the Options page.

Part I: Modify the Web Filter

1. Enable block page redirection

Set up for each sub-group

1. Make modifications in one of the redirect URL tabs:
2. Set the redirect URL to: http://<server for
NOTE: The Web Filter console does not accept the URL with a
port setting (:<port for block page>), so to get around this the
block page must be placed at the default HTTP port, which is 80.
Since the console may not allow certain characters (e.g. "_"), if
such characters are used in the URL a modified name must be
used instead for the <blockpage>.
M86 S U G
ECURITY SER UIDE
• Go to: Policy > IP > "Group Name" > "Sub-Group
Name" > Sub Group Profile > Redirect URL
• Go to: Policy > Global Group > Global Group Profile >
Default Redirect URL
block_page>[:<port for block page>]/<blockpage>
As a result, the Web Filter will redirect the block page to
the customized one with the following link format:
A S
PPENDICES ECTION
A B
PPENDIX
423