M86 Security IR Web Filter User Manual page 492

A S
PPENDICES ECTION
470
A D
PPENDIX
Add, remove internal filter host server
NOTE: Entries made in this portion of the user interface are
optional. If you have one filter host server on your network, the IP
address would be the same IP address you entered for the mobile
filter host server.
1. Click the ellipses (...) button to the right of the Internal
filter host(s) field to open the Add/Remove Internal Filter
Host(s) dialog box:
Fig. D-17 Add/Remove Internal Filter Host(s)
2. In the IP or Host Name field, enter the public IP address
or hostname of your internal filter host server.
3. By default, 81 displays in the Port field and should not be
modified unless the internal filter host server is using a
different port.
4. Click Add to include the entry in the list box below.
5. After entering host criteria for each internal filter, click OK
to close the dialog box and to display your entries in the
Internal filter host(s) field of the Package Configuration
window.
NOTE: To remove an internal filter from the list, select the entry
from the Hosts list box, click Delete, and then click OK.
M86 S U G
ECURITY SER UIDE