Set Up An Operating System And Drivers - Sun Oracle Sun Server X4-2L Getting Started Manual

Note – You can also access Oracle System Assistant using the Oracle ILOM Remote Console. This access method
requires setting up a connection to Oracle ILOM and accessing the host console using an Oracle ILOM web
connection. Refer to the Oracle x86 Administration Guide for X4 Series Servers for instructions.
5. To set up the server's network connection, click Configure Network.
6. To download the latest server firmware and software, click Get Updates.
7. To update the Oracle ILOM, BIOS, disk expander, or host bus adapter (HBA) firmware on the server, click
Update Firmware.
8. To configure Oracle ILOM, click Configure Hardware > Service Processor Configuration.
9. To configure RAID, click Configure Hardware > RAID Configuration.
10. To install an Oracle VM, Linux, or Windows operating system, and also download and install system
drivers and firmware, click Install OS.
For information on other supported OS installation options, see
Drivers" on page 5.
▼ 6. Set Up an Operating System and Drivers
♦
Use the options in the following table to set up a supported operating system (OS) and required drivers.
OS Setup Option
Configure preinstalled Oracle Solaris,
Oracle VM, or Oracle Linux
Install OS: Oracle VM, Linux, or Windows
Install Oracle Solaris OS
Install VMware ESXi software
Install supported OS drivers
If you do not have access to Oracle System Assistant to install drivers, you can download the latest Sun Server
X4-2L software release from the My Oracle Support website at:
Refer To:
Sun Server X4-2L Installation Guide
Use Oracle System Assistant (recommended) or refer to the installation guide
for the OS
Sun Server X4-2L Installation Guide for Oracle Solaris Operating System
Sun Server X4-2L Installation Guide for VMware ESXi
Use Oracle System Assistant (recommended) or refer to the installation guide
for the OS
"6. Set Up an Operating System and
http://support.oracle.com
5