Changing “Engine Start Stop” Switch Mode - Toyota GT86 Owner's Manual

2-1. Driving procedures

Changing "ENGINE START STOP" switch mode
Modes can be changed by pressing the "ENGINE START STOP"
switch with the brake pedal (vehicles with an automatic transmis-
sion) or clutch pedal (vehicles with a manual transmission)
released. (The mode changes each time the switch is pressed.)
172
Off*
The emergency flashers can
be used.
The smart entry & start system
indicator light (green) is off.
ACCESSORY mode
Some electrical components
such as the power outlet can
be used.
The smart entry & start system
indicator light (green) flashes
slowly.
IGNITION ON mode
All electrical components can
be used.
The smart entry & start system
indicator light (green) flashes
slowly.
*: Vehicles with an automatic
transmission: If the shift lever is
in a position other than P when
turning off the engine, the
"ENGINE START STOP" switch
will be turned to ACCESSORY
mode, not to off.