Engine (Ignition) Switch (Vehicles With A Smart Entry And Start System); Starting The Engine - Toyota GT86 Owner's Manual

2-1. Driving procedures
Engine (ignition) switch (vehicles with a smart entry & start system)
Performing the following operations when carrying the electronic
key on your person starts the engine or changes "ENGINE START
STOP" switch modes.


Starting the engine

Vehicles with an automatic transmission
STEP 1
Check that the parking brake is set.
STEP 2
Check that the shift lever is set in P.
If the shift lever is not set in P, the engine may not be started.
(P. 181)
STEP 3
Firmly depress the brake pedal.
The smart entry & start system indicator light (green) will turn on.
If the indicator light does not turn on, the engine cannot be
started.
STEP 4
Press the "ENGINE START
STOP" switch.
The engine will crank until it
starts or for up to 10 seconds,
whichever is less.
Continue depressing the brake
pedal until the engine is com-
pletely started.
The engine can be started
from any "ENGINE START
STOP" switch mode.
2
169