Joining An Existing Network (Joinnet); Creating A New Network Id (Newnet) - Phonak Roger inspiro User Manual

5.6 Joining an existing network (JoinNet)

If a network already exists, Roger inspiro can simply join
this network.
How to join an existing network:
Hold Roger inspiro within 10 cm (4 inches) of any
device that is already connected to the network.
Go to: Network / JoinNet
Roger inspiro will join the existing network.

5.7 Creating a new network ID (NewNet)

To create a new network within the same operating
range (i. e. room or department) as an existing network,
it is necessary to create a new network ID.
I Creating a new network ID will erase all the existing
network data in your Roger inspiro and there is no
way to revert back to the previous network ID.
How to create a new network ID:
Go to: Network / Create NewNet
35