Using Roger Inspiro To Check Devices (Check) - Phonak Roger inspiro User Manual

Hold Roger inspiro less than 10 cm (4 inches) from
the receiver and press Connect.
To go back to the main network:
Press the EndSub left softkey.
Hold Roger inspiro less than 10 cm (4 inches) from
the receiver and press Connect.

4.6 Using Roger inspiro to check devices (Check)

A network device's data can be checked wirelessly
using Roger inspiro.
Several types of data can be checked:
Network status
Link quality of connected devices
Stored device data
Roger DynaMic battery status
How to check a device:
Turn Roger inspiro and the device on.
Hold Roger inspiro within 10 cm (4 inches) of the
device.
29