Connecting Fm Receivers - Phonak Roger inspiro User Manual

4.2.2 Connecting FM receivers

An unlimited number of FM receivers can be connected
to Roger inspiro when Roger inspiro is in its Roger +
FM application mode. The receivers must be attached to
their respective hearing aids and these aids turned on.
How to connect:
Turn Roger inspiro on.
Hold Roger inspiro within 10 cm (4 inches) of the
receiver.
Ear-level receivers must be attached to their respective
hearing aids and these hearing aids turned on.
Body-worn receivers must be switched on.
Press the Roger inspiro's right Connect softkey. The
receiver will sound confirmation beeps.
The receiver is now connected with Roger inspiro and
the Talker can talk into the Roger inspiro microphone.
Repeat these steps to connect any additional receivers.
I Roger and FM receivers can be used simultaneously
with the same Roger inspiro.
25