Introduction - Martin FiberSource QFX 150 User Manual

I
NTRODUCTION
Thank you for selecting the Martin FiberSource QFX 150. This fiber optic lighting
fixture uses a long-life 150 watt discharge lamp and provides 4 colors plus white,
full-range dimming, and a variable-speed twinkle effect. It operates with DMX-512
controllers, in stand-alone mode, and in master/slave configuration.
S A F E T Y I N F O R M A T I O N
Warning! This product is for professional use only. It is not for household use.
This product presents risks of lethal or severe injury due. Read this manual before
powering or installing the fixture, follow the safety precautions listed below and
observe all warnings in this manual and on the fixture. If you have questions about
how to operate the fixture safely, please contact your Martin dealer or call the
Martin 24-hour service hotline.
To prot ect yoursel f and ot hers fr om electr ic shock
• Disconnect the fixture from power before removing or installing the lamp, fuses, or
any part, and when not in use.
• Always ground (earth) the fixture electrically.
• Use only a source of power that complies with local building and electrical codes
and has both overload and ground-fault protection.
• Do not expose the fixture to rain or moisture.
• Refer all service to a qualified technician.
To prot ect yoursel f and ot hers fr om UV radiat ion and lamp
explosion
• Do not operate the fixture without a fiber optic cable inserted.
• When replacing the lamp, allow the fixture to cool for at least 5 minutes before
opening. Protect your hands and eyes with gloves and safety glasses.
• Never look at a lamp while it is lit.
• Replace the lamp when it becomes defective or worn out, or before usage exceeds
110 percent of the rated average life.
4

Introduction

1