Martin FiberSource QFX 150 User Manual page 5

To prot ect yourself and ot hers f rom burns and f ire
• Never attempt to bypass the thermostatic switch or fuses. Always replace defective
fuses with ones of the specified type and rating.
• Keep all combustible materials (for example fabric, wood, paper) at least 0.1 meters
(4 inches) away from the fixture. Keep flammable materials well away from the
fixture.
• Provide a minimum clearance of 0.1 meters (4 inches) around fans and air vents.
• Allow the fixture to cool before handling.
• Do not modify the fixture or install other than genuine Martin parts.
• Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C (104° F).
To prot ect yourself and ot hers f rom injury due t o falls
• When suspending the fixture above ground level, verify that the structure can hold
at least 10 times the weight of all installed devices.
• Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
• Block access below the work area whenever installing or removing the fixture.
U N P A C K I N G
The packing material is carefully designed to protect the fixture during shipment -
always use it to transport the fixture.
The FiberSource QFX 150 comes with:
• Osram HQI-R 150 W lamp
• 3 m power cable w/ 3-pin IEC female cord cap
• 4 dichroic color filters
• user manual
Introduction 5