Konica Minolta bizhub 163 User Manual page 271

10
– Align the document on the scales above and to the left of the orig-
inal glass.
– For information on documents that can be used and the scanning
area of the image, refer to the User's Guide included with the ma-
chine.
3
Press the [Speed Dial] key, and then use the keypad to type in the 3-
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).
– When the destination address is entered, "OTHER SETTING=,"
appears. To change the transmission settings, such as the subject,
cc address or file format, press the [,] key. The "SCAN OTHER
SETTING" menu appears. For details on changing the transmission
settings, refer to "Changing the transmission settings" on
page 9-10.
– Specify a speed dial number between 241 and 250.
– If nothing is registered with the specified speed dial number, an er-
ror message appears. Enter the correct speed dial number.
– If the number was incorrectly entered, press the [Back] key, and
then type it in correctly.
4
Press the [OK] key.
The destination appears.
10-6
Performing a Scan to Server (FTP) operation
IC-206