Registering Destinations - Konica Minolta bizhub 163 User Manual

Registering destinations

8 Registering destinations
This chapter provides descriptions of the procedures for registering destina-
tion addresses.
8.1 Registering destinations
Destinations can be registered from the machine's control panel or from Pa-
geScope Web Connection. The following procedures describe how to regis-
ter destinations from the machine's control panel.
!
Detail
For details on registering destinations from PageScope Web Connection,
refer to "Using PageScope Web Connection" on page 11-1.
Operation
o: Can be set; -: Cannot be set
Scan to E-
mail
Scan to E-
mail
Scan to E-
mail
IC-206
E-mail address des- Description
tination
One-touch dial keys Press a one-touch
(Available only if fax dial key to easily
kit FK-506 is installed) specify the destina-
tion.
In an environment
where an LDAP server
is being used, the
LDAP server can be
searched for a desti-
nation to be regis-
tered.
Speed dial numbers A destination can be
specified by entering
the 3-digit speed dial
number.
In an environment
where an LDAP server
is being used, the
LDAP server can be
searched for a desti-
nation to be regis-
tered.
Group dial keys The transmission can
(Available only if fax be sent to multiple
kit FK-506 is installed) destination at the
same time by using a
single one-touch dial
key.
Machine con- PageScope
trol panel Web Connec-
tion
o o
o o
o o
8
8-1