5
Using the manual bypass tray
Follow the procedure described below when using the manual bypass tray
to print one page at a time.
1
From the computer, display the Setup tab for the printer driver, and
then select "Bypass" in the "Paper Source" list (page 4-19).
2
Perform the print operation from the computer.
3
When the message "PRINTER MODE LOAD PAPER" appears, load pa-
per into the manual bypass tray.
–
Insert one sheet of
paper with the front
side facing down,
lightly sliding the pa-
per as much as pos-
sible into the feed
slot.
5-6
Control panel operations for printing functions
IC-206