Konica Minolta bizhub 163 User Manual page 151

7
8
Use the keypad to type in the subnet mask, and then press the [OK]
key.
– For the subnet mask, consult with the network administrator.
9
Use the keypad to type in the gateway.
10
Press the [OK] key.
After the message "ACCEPTED" appears, the "NETWORK SETTING"
menu appears again.
11
Press the [Reset] key in the control panel.
– After the screen shown below appears, turn the machine off, then
on again to restart it.
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.
7-12
Network settings
IC-206