7
4
Press the [OK] key.
After the message "ACCEPTED" appears, the "NETWORK SETTING"
menu appears again.
5
Press the [Reset] key in the control panel.
–
After the screen shown above appears, turn the machine off, then
on again to restart it.
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.
Specifying the gateway transmission setting
1
In the "NETWORK SETTING" menu, press the [,] or [+] key until
"GATEWAY TX" is selected, and then press the [OK] key.
2
Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and
then press the [OK] key.
7-14
Network settings
IC-206