Ethernet Lan; Industrial Features; Mechanical And Environmental Specifications; Jumpers And Connectors - Advantech AIMB-701 User Manual

1.3.5

Ethernet LAN


Supports single/dual 10/100/1000 Base-T Ethernet port (s) via PCIe x1 bus
which provides a 500 MB/s data transmission rate.

Interface: 10/100/1000 Base-T

Controller: Intel 82579V(PHY) for LAN1, Intel 82583V for LAN2 (G2 version
only)
1.3.6

Industrial Features


Watchdog timer: Can generate system reset or NC. The watchdog timer is pro-
grammable, with each unit equal to one second or one minute (255 levels)
1.3.7

Mechanical and Environmental Specifications


Operating temperature: 0 ~ 60°C (32 ~ 140° F)

Storage temperature: -20 ~ 70° C (-4 ~ 158° F)

Humidity: 5 ~ 95% non-condensing

Power supply voltage: +3.3 V, +5 V, ±12 V, 5 VSB

Power consumption:
Maximum: +5 V at 1.80A, +3.3 V at 1.01 A, +12 V at 5.48 A, +5 VSB at 1.76 A
®
(Intel i7 2600 3.4 GHz processor, 4 GB UNB DDR3 Memory x2pcs)

Board size: 304.8 x 228.6 mm (12" x 9.6")

Board weight: 0.5 kg (1.68 lb)
1.4

Jumpers and Connectors

Connectors on the AIMB-701 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers that are
used to configure your system for your application.
The tables below list the function of each of the jumpers and connectors. Later sec-
tions in this chapter give instructions on setting jumpers. Chapter 2 gives instructions
for connecting external devices to your motherboard.
Table 1.1: Jumper list
Label
JCMOS1
JWDT1
PSON1
JSETCOM3
Table 1.2: Connectors
Label
LPT1
LAN1_USB12
LAN2_USB34
VGA1
DVI1
COM 1~2 and 4~6
COM3
AIMB-701 User Manual
Function
CMOS Clear
Watchdog reset
AT(1-2) / ATX(2-3)
COM3 RS-232/422/485 Jumper Setting
Function
Parallel port, supports SPP/EPP/ECP mode
LAN1 / USB port 1, 2
LAN2 / USB port 3, 4
VGA connector
DVI-D connector
Serial port: RS-232
Serial port: RS-232/422/485 (9-pin connector)
4