Connections - Funkwerk bintec R3000w User Manual
Tachnical data
Hide thumbs
Also See for bintec R3000w:
- User manual (62 pages) ,
- Manual (571 pages) ,
- Reference (518 pages)
Table of Contents
Advertisement
Technical Data
LED
Status
ISDN-0 B/D
upper line:
on
lower line:
on
flashing
ISDN-1 B/D
upper line:
on
lower line:
on
flashing
ADSL
upper line:
flashing
lower line:
flashing
on
both lines:
flashing
synchro-
nously
WLAN
upper line:
flashing
lower line:
flashing
slowly
on
Table 1-2:
LED status display
1.4
Connections
All connections are located on the rear of the gateway.
fers a 4-port Ethernet switch including a port with serial interface mode, a
DMZ/ETH5 interface, two ISDN interfaces as well as an ADSL interface.
bintec R3000w
Information
ISDN D channel is active.
One ISDN B channel is active.
Both ISDN B channels are active.
ISDN D channel is active.
One ISDN B channel is active.
Both ISDN B channels are active.
Data traffic via the ADSL interface.
The gateway synchronizes with the ADSL
provider's DSLAM.
The gateway has sucessfully synchronized
with the ADSL provider's DSLAM.
System error (ADSL)
Data traffic via the WLAN interface.
The WLAN module is active.
At least one WLAN client is connected.
bintec User's Guide
1
bintec R3000w
of-
7
Advertisement
Table of Contents
