Xdsl Credits Submenu; Maximum Number Of Outgoing Connections - Funkwerk bintec R4100 User Manual

CREDITS
3

xDSL Credits Submenu

The DSL C submenu is described below.
X REDITS
➜
The CREDITS DSL C
X REDITS
submenu.
R4100 Setup Tool
[CREDITS][XDSL CREDITS][EDIT]: Configure PPPoE Credits
Surveillance (Changing a value will
reset all measured values!)
Measure Time (sec)

Maximum Number of Outgoing Connections

Maximum Time for Outgoing Connections (sec)
SAVE
The PPP E C menu consists of the following fields:
O REDITS
Field
Surveillance
Measure Time (sec)
xDSL Credits Submenu
menu provides access to the PPP
Funkwerk Enterprise Communications GmbH
CANCEL
Description
Defines whether the Credits Based Accounting
System is to be activated for PPPoE connec-
tions. Possible values: off (default value), on.
If the system is on, you can define the parame-
ters listed below.
Time in seconds during which the limits for
number and duration of outgoing connections
apply. The measured values are reset to 0
when the time expires.
The default value is 86400.
3
E C
O REDITS
MyGateway
on
86400
on
1000
on
28800
bintec User's Guide 9