Baby Mode 1; Baby Mode 2 - Panasonic Lumix DMC-LX2 Operating Instructions Manual

MENU
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P61)
SET

Baby mode 1

1

Baby mode 2

2
This mode adjusts the exposure and tone
to bring out the healthy colour of your
baby's skin. The flash will be weaker than
normal if you choose to use it.
You can set the birthdays of two babies by
using [BABY1] and [BABY2].
1
1 month 10days
10:00
• The baby's age appears when you are
showing the picture later.
• You can also use the [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-]
software on the included CD-ROM to print
your baby's age. (For details, refer to the
separate operating instructions for PC
connection.)
n Age display setting
• To show age, first enter the birthday,
select [WITH AGE], and press [MENU/
SET].
• To not show age, select [WITHOUT AGE],
and press [MENU/SET].
BABY1
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
CANCEL SELECT
68
VQT0Y66
19
1.DEC.2006
MENU
SET
Advanced
n Birthday setting
1 Select [BIRTHDAY SET.] and press
[MENU/SET].
2 [PLEASE SET THE BIRTHDAY OF THE
BABY] appears on the display. Select
year/month/day with w/q, then change
the date with e/r.
3 Press [MENU/SET] to exit.
• If you select [WITH AGE] but you haven't
set the birthday, a message appears.
Press [MENU/SET] and follow steps 2
and 3 to enter the birthday.
• The focus range is 5 cm (Wide)/30 cm
(Tele) to Z.
• The ISO sensitivity is fixed to [
• The auto bracket setting is disabled.
• The digital zoom is fixed to [OFF].
• After turning on the camera in [BABY1]/
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5 seconds at the
bottom of the screen.
• Actual age displays depend on the
[LANGUAGE] setting.
• The display style when printing may differ
slightly from the display style on the
screen.
• The display on the actual day of your
baby's birth will be 0 month 0 day.
• Check the clock and birthday settings if
the age shown is incorrect.
• Note that if you have selected [WITHOUT
AGE], age information will not be
recorded for any pictures you take. The
information will not appear even if you
select [WITH AGE] after taking pictures.
• For resetting the birthday setting, use
[RESET] in the [SETUP] menu. (P23)
].
ISO