Panasonic Lumix DMC-LX2 Operating Instructions Manual page 125

Conditions
The computer does not
recognise the card.
(The built-in memory is
recognised.)
The pictures cannot be
printed with printers.
The sides of printed
images are cut off.
The picture size does not
fit the TV screen.
n Others
Conditions
Unreadable language
was selected by mistake.
The camera will make
sounds caused by internal
mechanical movement
when it is shaken.
Cannot change the auto
review setting.
A certain part of the
picture blinks.
When the shutter button
is pressed halfway, a red
lamp turns on
sometimes.
The AF assist lamp does
not turn on.
Others
Disconnect the USB connection cable, then insert the card
and reconnect the cable.
Does the printer support PictBridge? You cannot print
pictures with printers which do not support PictBridge. (P109)
Set the camera's mode dial to Print mode (P109).
• If your printer has trimming and border settings, change the
settings so that there is no trimming and no border. (Read
your printer's operating instructions.)
• Some photography shops can handle pictures shot in the
[ ] aspect ratio (P59). Enquire before sending them for
j
printing.
Check the [TV ASPECT] setting on this unit. (P24)
Press [MENU/SET], select the [SETUP] menu icon [ ] and
then select the [{] icon to set the desired language. (P24)
The sound arises when the lens moves. This is not a
malfunction.
You cannot change the auto review setting when using auto
bracket, using burst modes, shooting motion pictures, using
[SELF PORTRAIT] in scene mode, recording sound and
setting quality to [RAW].
• Is [HIGHLIGHT] set to [ON]? (P23)
–This appears due to the highlight display function which
shows white saturated areas. (P39)
In dark places, the AF assist lamp (P89) lights red to make it
easier to focus on a subject.
Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]?
(P89)
Are you taking pictures in dark places? The AF assist lamp
does not turn on in bright places.
The AF assist lamp does not turn on when [SCENERY],
[NIGHT SCENERY], [SELF PORTRAIT], [FIREWORKS] or
[AERIAL PHOTO] in scene mode (P61) is selected.
Causes
Causes
125
VQT0Y66