Panasonic Lumix DMC-LX2 Operating Instructions Manual page 72

Finishing setting the home area
• If you are setting the home area for the
first time, the screen returns to the screen
shown in step 1 of "Setting the home
area [HOME]" after you press [MENU/
SET] to set your home area. Press w to
return to the screen shown in step 4 and
then press [MENU/SET] to close the
menu.
• If you are setting the home area for the
second time etc., the screen returns to
the screen shown in step 4 after you
press [MENU/SET] to set your home
area. Press [MENU/SET] again to close
the menu.
n Setting the travel destination area
(Perform steps 1, 2, 3 and 4 on P71.)
1 Press e to select [DESTINATION] and
then press [MENU/SET] to set.
WORLD TIME
DESTINATION
HOME
--:-- --.--.----
CANCEL
SELECT
A
A:Depending on the setting, the time at the
travel destination area or the home area
is displayed.
• If you are setting the travel destination
area for the first time, the date and time
are displayed as shown in the screen
above.
2 Press w/q to select the area the travel
destination is in and then press [MENU/
SET] to set.
10:00
Adelaide
+ 8:30
SELECT
72
VQT0Y66
MENU
MENU
SET
SET
18:30
MENU
CANCEL
SET
MENU
SET
Advanced
• The current time at the selected travel
destination area is displayed on the top
right of the screen and the time difference
from the home area is displayed at the
bottom left of the screen.
• If daylight saving time [
your travel destination, press e. (The time
advances by one hour.) Press e again to
return to the original time.
• The names of major cities in the selected
area are displayed. Also, the time
difference between the selected area and
the home area is displayed on the bottom
left of the screen. (Refer to P73 for
information about the names of the major
cities that are displayed.)
3 Press [MENU/SET] to close the menu.
SETUP
CLOCK SET
WORLD TIME
MONITOR
GUIDE LINE
TRAVEL DATE
SELECT
• You can also use the joystick to perform
steps 1 to 3.
• The icon changes from [
setting the travel destination.
• Return the setting to [HOME] when the
vacation is finished by performing steps 1,
2, 3, 4 and then steps 1 and 2 of "Setting
the home area [HOME]" (P71).
• If you cannot find the travel destination in
the areas displayed on the screen, set by
the time difference from the home area.
] is used in
1 / 5
MENU
0
SET
OFF
MENU
EXIT
] to [ ] after