Attaching The Lens Cap/Strap - Panasonic Lumix DMC-LX2 Operating Instructions Manual

Attaching the Lens Cap/Strap

n Lens Cap (supplied)
1
Remove the lens cap.
2
Pass the string through the hole
on the lens cap.
3
Pass the string through the hole
on the camera.
4
Attach the lens cap.
18
VQT0Y66
Preparation
n Strap (supplied)
1
Pass the strap through the hole at
the Strap Eyelet.
• Check that the strap is firmly attached to
the camera.
• When you turn the camera off, carry the
camera or play back the pictures, attach
the lens cap to protect the surface of the
lens.
• Detach the lens cap before turning on the
camera in the recording mode.
• When the mode dial is set to one of the
recording modes and the camera is
turned on with the lens cap attached, the
message [REMOVE LENS CAP AND
PRESS q BUTTON] appears. After
removing the lens cap, press the q cursor
button.
• Be careful not to lose the lens cap.
• When detaching the strap, use a pointed
object to loosen the knot and then detach
it.
• When using the lens cap and the strap at
the same time, attach the strap before the
lens cap. If you attach the lens cap first, it
may become difficult to attach the strap.