Party Mode; Candle Light Mode; Baby Mode 1; Baby Mode 2 - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Refer to P48

Party mode

a
Use to take pictures at wedding receptions,
indoor parties, etc. Both the people and
the background can be shot with natural
brightness using the fl ash and slow shutter
speed.
Technique for Party mode
■
Use the fl ash.
•
• Use a tripod and the self-timer for best
results.
• Rotate the zoom lever to Wide (1 ×),
about 1.5 m (4.92 feet) from the subject.
• The fl ash setting can be set to Forced
ON/Red-eye reduction [q] or Slow
sync./Red-eye reduction [u].
• You cannot change the white balance
setting.

Candle light mode

g
Use to get the most from the mood created
by candlelight.
Technique for Candle light mode
■
• Don't use the fl ash.
• Use a tripod and the self-timer for best
results.
• The focus range is 5 cm (0.16 feet)
(Wide)/30 cm (0.98 feet) (Tele) to Z.
• The fl ash setting can be set to Forced
ON/Red-eye reduction [q] or Slow
sync./Red-eye reduction [u].
• You cannot change the white balance
setting.
VQT1L68_DMC-LS80_GN_EN.indd 51 VQT1L68_DMC-LS80_GN_EN.indd 51
Advanced-Shooting
for details on selecting a scene menu.

Baby mode 1

Baby mode 2

Adjusts the exposure and tone to bring
out the healthy color of your baby's skin.
The fl ash will be weaker than normal if you
choose to use it.
• You can set two different birthdays and
names by using [BABY1] and [BABY2].You
can display the set items when playing back
the pictures and stamp them on the recorded
pictures with [TEXT STAMP]
• You can also use the [PHOTOfunSTUDIO-
viewer-] software on the included CD-ROM
to print your baby's age. (For details, refer
to the separate operating instructions
(PDF fi le) of the software.)
■ Age and name display setting
1 BABY1
AGE OFF
NAME OFF
CANCEL SELECT
1. Select [AGE] or [NAME] using e/r and
press q.
2. Select [SET] using e/r and press
[MENU/SET].
3. When setting [Age]:
Select year / month / day using w/q and
set them using e/r.
Setting [NAME]: Enter the name (Refer
to P76 for details on text entry)
4. Press [MENU/SET]
[AGE] and [NAME] is automatically set
to [ON] and displayed on the screen
when age and name is set. To change
display/none, select [ON] or [OFF] in
[AGE] or [NAME] in step 1 above, and
press [MENU/SET].
• If [ON] is selecteted when name or
age is not set, the setup screen is
automatically displayed.
• If [AGE] or [NAME] is set to [OFF], the
age or name will not be displayed.
( P78 ).
MENU
EXIT
51
VQT1L68
2007/12/13 11:08:46 2007/12/13 11:08:46