Panasonic Lumix DMC-LX2 Operating Instructions Manual page 22

Panasonic digital camera operating instructions
Hide thumbs Also See for Lumix DMC-LX2:
Table of Contents

Advertisement

MENU
Press [
] to display menu, enter [SETUP] and select the item. (P20)
SET
Menu
5 POWER SAVE [1 MIN.]/[2 MIN.]/[5 MIN.]/[10 MIN.]:
ECONOMY
X MF ASSIST
(Recording
mode only)
22
VQT0Y66
Preparation
If you perform no operations, the camera turns off
automatically after the interval you set to save the battery.
[OFF]:
The camera is not automatically turned off.
• Press the shutter button halfway or turn the camera off and on to
recover from the power save mode.
• In economy mode, power save mode is fixed to [2 MIN.].
• When using the AC adaptor (DMW-AC5; optional)/connecting to a
PC or a printer/recording motion pictures/playing back motion
pictures/during Slide Show, the power save mode is not activated.
(However, the setting for power save mode is fixed to [10 MIN.]
while pausing a slide show or playing back a manual slide show.)
Battery life is saved by reducing the brightness of the LCD monitor
and turning it off automatically when the camera is not being used in
recording mode.
[LEVEL 1]: The LCD monitor turns off if the camera is not operated
for about 15 seconds in recording mode.
[LEVEL 2]: The LCD monitor turns off if the camera is not operated
for about 15 seconds in recording mode or for about 5
seconds after taking a picture.
[OFF]:
Economy mode cannot be activated.
• In economy mode, the LCD monitor is turned off while the flash is
being charged.
• The status indicator lights while the LCD monitor is turned off.
Press any button to turn on the LCD monitor again.
• Power save mode is fixed to [2 MIN.] in economy mode.
[However, power save mode is not activated when using the AC
adaptor (DMW-AC5; optional).]
• Economy mode will not work when using the AC adaptor (DMW-
AC5; optional), recording in motion picture mode, the menu screen
is displayed or the self-timer is set.
• The brightness of the LCD monitor is not reduced in Power LCD
mode and high angle mode.
In manual focus, assistance screen appears on the centre of the
screen to facilitate focusing on the subject. (P55)
[MF1]: The centre of the screen is enlarged. You can adjust the
focus while determining the composition of the whole of the
screen.
[MF2]: The whole of the screen is enlarged. This is convenient for
adjusting the focus in Wide angle shots.
[OFF]: The screen is not enlarged.
Functions

Advertisement

Table of Contents
loading

Table of Contents