Connecting To Other Equipment; Connecting To A Pc - Panasonic Lumix DMC-LX2 Operating Instructions Manual

Connecting to a PC

Set the camera's mode dial to a mode
other than Print mode [
• By connecting the camera to a computer,
you can upload your pictures, then use the
software on the included CD-ROM ([LUMIX
Simple Viewer] and [PHOTOfunSTUDIO-
viewer-] for Windows
images by e-mail.
• If you use Windows 98/98SE, install the
USB driver and then connect the
camera to the computer.
• For details about installing [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-]
etc., refer to the separate operating
instructions for PC connection.
D
E
C
ACCESS
: AC adaptor (DMW-AC5; optional)
A
• Use a battery with sufficient battery power
(P13) or the AC adaptor (DMW-AC5; optional).
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC5; optional).
: USB connection cable (supplied)
B
: This message appears during data transfer.
C
106
VQT0Y66

Connecting to other equipment

].
®
) to print or send your
B
A
: Check the facing of the connector and
DE
push straight in.
1
Turn on the camera and the PC.
2
Connect the camera to a PC via
the USB connection cable B
(supplied).
• Connect the USB connection cable with
the [f] mark facing the [w] mark on
the [DIGITAL] socket.
• Hold D and then insert or pull the USB
connection cable straight.
Do not try to force the connector in
backwards or sideways. This can damage
this unit and the equipment you are
connecting.
[Windows]
The drive appears on the [My Computer]
folder.
• If it is the first time you are connecting the
camera to a PC, the required driver is installed
automatically so that the camera can be
recognised by the Windows Plug and Play,
then it appears on the [My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when you
connect the camera with no card inserted.
• The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
n Motion picture playback on a PC
Use "QuickTime" (for Windows 2000/XP) in
the supplied CD-ROM when you play back
motion pictures recorded on this camera on
your PC.
• Download [QuickTime6.5.2 for PC] from
the following website and install it on your
PC when you use Windows98/98SE/Me.
http://www.apple.com/support/quicktime/
• The software is a standard Macintosh
feature.