Taking Pictures By Setting The Exposure; Manually; Manual Exposure - Panasonic Lumix DMC-LX2 Operating Instructions Manual

Taking pictures by setting the exposure manually

Manual exposure

O
Decide the exposure by setting the aperture
value and the shutter speed manually.
1
Move the joystick towards e/r/w/
q to set the aperture value and
the shutter speed.
100
ISO
1
A B
• e/r: Set the aperture value
shutter speed
• w/q: Select the aperture value and the
shutter speed.
2
Press the shutter button halfway.
C
• Indication for the condition of exposure
(manual exposure assistance) appears for
about 10 seconds.
• When the exposure is not adequate, set the
aperture value and the shutter speed again.
19
and the
A
.
B
C
Advanced
3
Take the picture.
n Manual Exposure Assistance
• The manual exposure assistance is an
approximation. We recommend taking
pictures and then checking them using
the review function.
• Refer to P54 for the available range of the
aperture value and the shutter speed.
• You cannot set the following items in
manual exposure.
–Slow sync./Red-eye reduction [u]
(P42)
–[AUTO] or [
(When the recording mode is switched to
Manual exposure, the ISO sensitivity is
automatically set to [ISO100] even
though it was set to [AUTO] or [
beforehand.)
–Compensating the Exposure (P47)
• The brightness of the LCD may differ from
the brightness of pictures you take. Check
the picture with review or play mode.
• If the exposure is not adequate, the aperture
value and the shutter speed turn red when
pressing the shutter button halfway.
• When the shutter speed is slow, we
recommend using a tripod.
The exposure is
adequate.
Set to faster shutter
speed or larger aperture
value.
Set to slower shutter
speed or smaller
aperture value.
] in ISO sensitivity (P83)
ISO
]
ISO
53
VQT0Y66