Table of Contents
Advertisement
Attaching the Lens Cap/Shoulder Strap
∫ Lens Cap
•
When you turn the camera off or carry the camera, attach the lens cap to protect the surface of
the lens.
Pass the string through the hole on the
camera.
Pass the same string
through the hole on the
lens cap.
Attach the lens cap.
•
Detach the lens cap before turning on the
camera in the Recording Mode.
•
Do not hang or swing around this unit with
the lens cap string attached.
•
Make sure to detach the lens cap when
turning the power [ON] or zooming.
•
Be careful not to lose the lens cap.
•
Since the lens cap string is long, be careful
not to let it get tangled with the shoulder
strap or let it hit the tripod during motion
picture recording.
Before Use
- 12 -
Advertisement
Table of Contents
