Table of Contents
Advertisement
•
A worldwide power supply of 100-240V AC
•
A standard 19" rack mount size of 1U with included rack "ears"
Note: The VS-88DTP requires STP (shielded twisted pair) cable. For optimum
range and performance, use Kramer's BC-DGKat524, BC-DGKat623 or
BC-DGKat7a23 cables. The transmission range depends on the signal resolution,
graphics card and display used. The distance using non-Kramer CAT 5, CAT 6,
and CAT 7 cables may not reach these ranges. Use only shielded cable where
both ends of the shield are soldered to ground.
3.1
Defining the VS-88DTP 8x8 DVI - Twisted Pair Matrix
Switcher
This section defines the VS-88DTP.
VS-88DTP - Overview
5
Advertisement
Table of Contents
